Categories

PETROCLEAR FILTER 51130P

Price:
$11.79
Manufacturer: PETROCLEAR
Model: 51130P
Availability: In Stock
Average Rating:

PETROCLEAR FILTER 51130P

BROCHURE   SPIN ON FILTER

Benefits:

  • PetroClear models 51110P and 51130P are particulate removing spin-on filters designed for aftermarket cost efficient particulate filtration of fuels at high volume fueling locations such as truck stops, card lock sites, and industrial and commercial applications.
  • PetroClear models 51110P and 51130P are particulate removing spin-on filters designed to remove particulate from NEAT GASOLINE, Ethanol blended gasoline, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene, fuel oils, lube oils and synthetic fluids.
  • PetroClear models 51110P and 51130P are particulate spin-on filters. These filters are designed for particulate removal only and WILL NOT REACT TO WATER IN NEAT GASOLINE OR DETECT PHASE SEPARATION IN ETHANOL BLENDED GASOLINE.
  • PetroClear model 51110P filter offers efficient 10 micron nominal particulate removal (nominal = 75% efficiency).
  • PetroClear model 51130P filter offers efficient 30 micron nominal particulate removal (nominal = 75% efficiency).
  • Compatible with NEAT GASOLINE, Biodiesel and Ethanol blended fuels.

Specifications:

  • PetroClear model 51110P utilizes a 10 micron cellulose media to remove particulate from gasoline and diesel fuels including all Ethanol blended gasoline, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene, fuel oils and synthetic fluids. Removes a minimum of 75% of particulate 10 micron size (and approximately 100% of larger sized particulate).
  • PetroClear model 51130P utilizes a 30 micron cellulose media to remove particulate from gasoline and diesel fuels including all Ethanol blended gasoline, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene, fuel oils and synthetic fluids. Removes a minimum of 75% of particulate 30 micron size (and approximately 100% of larger sized particulate).
  • The maximum flow rate for PetroClear models 51110P and 51130P is 40 gpm (151 lpm). Maximum operating pressure is 50 psid (3.4 bar). Maximum differential pressure is 25 psid (1.7 bar).
  • PetroClear models 51110P and 51130P utilize a standard 1-1/2"-16 UNF mounting thread ref. (1" flow) required for most spin-on filter adaptors used in aftermarket and/or high-flow applications.
  • Adaptors are available for models 51110P and 51130P in aluminum. These adaptors are available in both NPT or BSP inlet/ outlet threads. Inlet/outlet sizes are available in 1" and 1-1/2" single adaptors. Adaptors are also available in a dual style with both 1-1/2" and 2" inlet/outlet (2" 4" bolt SAE flange combination).
  • Each filter is packaged with a separate gasket that will fit most standard brands of adaptor filter mounting bases. Install gasket in adaptor's groove by placing in groove at 3 to 4 places and then smoothing gasket between those points. Lubricate with light oil. NOTE: Gasket does not mount on filter!
  • If using this filter in a hydraulic/lube oil application, verify that you are applying the filter on a spin-on filter head that has a by-pass valve.

Specifications:

Model 51110P 51130P
Filter Type Spin-On Spin-On
Media Type *Cellulose *Cellulose
Micron Rating 10 Micron (Nominal = 75% Efficiency) 30 Micron (Nominal = 75% Efficiency)
Diameter 5.00" 5.00"
Height 11.37" 11.37"
Mounting Thread 1-1/2" –16 UNF 1-1/2" –16 UNF
Flow 1" flow 1" flow
Shell Thickness 0.020 0.020
Gasket Material Buna N Buna N
Collapse (Min.) 150 psid (10.3 bar) 150 psid (10.3 bar)
Burst (Min.) 250 psi (17.2 bar) 250 psi (17.2 bar)
Max. Operating Temp. 250°F (139°C) 250°F (139°C)
Min. Operating Temp. -20°F (-28.9°C) -20°F (-28.9°C)

*Particulate Removing

Adaptors:

Catalog Description
1.00 N 1-16 1" NPT Inlet/Outlet Ports, 1-1/2"-16 UNF (aluminum)
1.50 N 1-16 1-1/2" NPT Inlet/Outlet Ports, 1-1/2"-16 UNF (aluminum)
D2.0 N 1-16 2" NPT Inlet/Outlet Ports, 1/2"-16 UNF (aluminum)
The 4-bolt SAE flange combination allows both 1-1/2" & 2" inlet/outlet combinations.
1.00 B 1-16 1" BSP Inlet/Outlet Ports, 1-1/2"-16 UNF (aluminum)

PETROCLEAR FILTERS ARE NOT TO BE USED IN AVIATION FUEL APPLICATIONS.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: